RevX Acrylic X Tub Cold Plunge with LUX High-Performance Chiller and Filtration System

The RevX Acrylic X Tub Cold Plunge System combines a deep acrylic immersion tub with the LUX High-Performance Chiller and Filtration System for a customizable water temperature experience. The tub features three-inch-thick foam-insulated walls designed to help maintain water temperature and reduce heat transfer. Adjustable water-flow jets provide additional water movement during use. The included 1.5-horsepower chiller can cool water to 34°F or heat it to 104°F, offering both cold and warm water settings.

Specifications

• Brand: RevX

• Product Name: Acrylic X Tub Cold Plunge System

• Tub Material: Acrylic

• Tub Height: Over 34 inches, as stated in the supplied product information

• Wall Insulation: Three-inch-thick foam insulation

• Water Flow: Adjustable water-flow jets

• Chiller and Filtration System: LUX High-Performance Chiller and Filtration System

• Chiller Power: 1.5 horsepower

• Minimum Cooling Temperature: 34°F, as stated in the supplied product information

• Maximum Heating Temperature: 104°F, as stated in the supplied product information

• Filtration: Included; filtration specifications not provided

• Dimensions and Water Capacity: Not provided

• Electrical Requirements: Not provided

• Warranty: Not provided

Features

• Deep Acrylic Tub: Designed for upright immersion, with a tub height exceeding 34 inches.

• Insulated Construction: Three-inch foam-insulated walls help reduce heat transfer and support temperature retention.

• Adjustable Water-Flow Jets: Provide adjustable water movement during cold or warm water sessions.

• LUX High-Performance Chiller: Includes a 1.5-horsepower chiller designed to cool or heat the water within the stated temperature range.

• Temperature Versatility: Supports cold-water settings down to 34°F and warm-water settings up to 104°F, according to the supplied product information.

• Integrated Filtration System: Includes water filtration equipment to support ongoing water maintenance.

• Combined System: Integrates the acrylic tub, chiller, and filtration system into one cold-plunge setup.

Maintenance

• Water Quality: Follow the manufacturer's instructions for water treatment, filtration, and water replacement.

• Filter Care: Inspect and clean or replace filter components according to the manufacturer's recommended schedule.

• Tub Cleaning: Use cleaning products approved for acrylic surfaces to avoid scratching or damaging the tub.

• Chiller Maintenance: Keep the chiller's ventilation areas clear and follow the manufacturer's maintenance and operating instructions.

• Insulation and Connections: Periodically inspect visible plumbing connections and equipment for leaks, wear, or damage.

• Water Temperature: Monitor water temperature before each session and follow the manufacturer's recommended operating limits.

Product Use Notice

The RevX X Tub Cold Plunge System is designed for controlled cold- and warm-water immersion. Cold exposure may pose risks, including cold shock, changes in heart rate and blood pressure, and hypothermia. Water at 34°F is extremely cold and may be unsafe for some users. Begin only with an appropriate, conservative exposure plan, monitor your response, and avoid prolonged immersion. Do not use the system alone during cold plunging. People with cardiovascular conditions, circulation problems, cold sensitivity, or other relevant medical concerns should consult a qualified healthcare professional before use. Never enter the tub while impaired, and exit immediately if you experience numbness, dizziness, confusion, or unusual discomfort. Follow the manufacturer's operating, sanitation, and safety instructions.

Safety Instructions

• Cold Exposure: Do not assume that the lowest available temperature is appropriate for every user. Use conservative exposure durations and follow qualified guidance.

• Supervision: Avoid cold plunging alone, particularly at very low water temperatures.

• Temperature Verification: Check the water temperature with a reliable thermometer before entering.

• Electrical Safety: Confirm voltage, amperage, grounding, and required electrical protection with the manufacturer and a qualified electrician before installation near water.

• Water Sanitation: Filtration alone does not necessarily disinfect water. Follow the manufacturer's guidance for maintaining safe water quality.

• Installation: Place the system on a stable, level surface capable of supporting the combined weight of the tub, equipment, and filled water.

• Operating Limits: Follow all manufacturer instructions for water levels, temperature settings, circulation, and maintenance.